Things To Note When Bundling Cables With Stainless Steel Cable Ties
Publish Time: Author: Site Editor Visit: 31
Everyone should have seen cable ties. According to the material of the cable ties, they can be divided into plastic cable ties and metal cable ties. Among them, Stainless Steel Cable Tie is favored by people because of its good bundling force, corrosion resistance and adjustability. In many cases, it is used to bundle cables. What should we pay attention to when bundling cables? Take a look at the editor's introduction.
1. Choose cable ties of appropriate specifications. The size and length of the cable ties should be selected according to the size and length of the bundled cables. If the cable ties are too loose, they cannot achieve the fixing effect. If they are too tight, they may cause damage to the cables.
When choosing cable ties, consider the size of the cable itself and environmental factors, such as the temperature change of the cable and the installation location of the cable.
2. Correct sealing. Sealing is an important part of fixing cables with stainless steel cable ties. When sealing, insert the tail of the cable tie into the buckle of the cable tie, fold it to the inside of the buckle, and then press it with pliers.
It should be noted that there should be no sharp angles or edges at the sealing part, otherwise the cable may be damaged. At the same time, the flatness and tightness of the sealing part should be ensured.
3. Avoid direct contact between the cable tie and the cable surface. The surface of the cable tie is rough, which may scratch the cable surface or rub the cable protective layer. In order to avoid damaging the cable surface, you can put a protective cover on the cable surface, or use rubber gaskets and other materials at intervals.
4. Prevent the cable tie from deforming. Stainless steel cable ties are easily deformed by force, so the force of the cable tie must be stable when using it. Especially in the curved part of the cable tie, pay attention to the degree of deformation of the cable tie to avoid damaging the integrity of the cable.
5. Follow relevant specifications. When bundling cables, you should strictly follow relevant specifications, such as cable bundling tension, laying requirements, and the use of corrosion-resistant cable ties. Only by strictly following the specifications can the safety and stability of the cable be guaranteed.
Using stainless steel cable ties to bundle cables is a convenient and fast method. Of course, if you want to ensure the effect of bundling, the method of use needs to be correct. During the bundling process, you need to pay attention to the above points. Only by using cable ties reasonably and in a standardized manner can the cables be firmly bundled together.
